Welcome to our websites!
GE CIFX50-C0 interface board
GE CIFX50-C0
Product Overview
The GE CIFX50-C0 is a high-performance industrial communication interface card, belonging to the product line of General Electric (GE) that adopts technologies from Hilscher (Germany). This module is not independently developed by GE; instead, it integrates Hilscher’s mature technologies and serves as a key communication component in GE’s automation solutions. Acting as a core “protocol translator” in control systems, it equips GE’s PLCs, industrial computers, or customized controllers with strong capabilities to connect to various mainstream real-time industrial Ethernet networks. The core value of the GE CIFX50-C0 lies in its excellent flexibility and performance. By featuring a powerful dedicated communication ASIC (Application-Specific Integrated Circuit) and a dual-port switch, it enables microsecond-level data synchronization and extremely low communication jitter. This ensures deterministic real-time exchange of control commands and on-site data in high-speed automation applications, thereby meeting the demands of complex control tasks with extremely strict time requirements.
Product Specifications
- Product Model: CIFX50-C0
- Manufacturer: General Electric (GE) (Adopting Hilscher Technology)
- Product Type: Industrial Ethernet Communication Interface Card (PCI Express)
- Master/Slave Mode: Supports controller (master) and device (slave) modes for multiple protocols
- Supported Protocols: PROFINET IO Controller/Device, EtherNet/IP Scanner/Adapter, Modbus TCP Server/Client
- Host Interface: PCI Express x1
- Network Interface: 2 x RJ45 (10/100/1000 Mbit/s), with built-in switch supporting linear topology
- Processor: Dedicated Communication ASIC
- Memory: Integrated large-capacity buffer memory
- Configuration Method: Protocol firmware loading and configuration via Hilscher software
- Operating Temperature: 0°C to +55°C (Suitable for control cabinet environments)
- Power Consumption: Typical value of 3.5W
- Certifications: Certified by PROFIBUS & PROFINET International (PI) and ODVA
Structure and Composition
The GE CIFX50-C0 is designed in a standard PCI Express half-length card form factor. The most core component on the front side of its PCB (Printed Circuit Board) is Hilscher’s dedicated communication ASIC chip, which is responsible for processing real-time data packets and protocol stacks of all communication protocols. The card is equipped with a large-capacity buffer memory for efficient management of input and output data images. It has two on-board Gigabit Ethernet PHY (Physical Layer) chips that drive two RJ45 interfaces with status indicators. These two interfaces integrate switch functions, supporting Device Level Ring (DLR) or linear topology without the need for an external switch. The gold finger part adopts a PCIe x1 interface, which is used to insert into the corresponding slot of an industrial computer or main controller to achieve high-speed data exchange with the host CPU. The card is usually fixed on the host chassis with bracket screws to ensure connection reliability in vibrating environments.
Application Fields
The GE CIFX50-C0 is widely used in fields that require high-performance industrial Ethernet communication. In the automotive manufacturing industry, it is used in body production lines, welding robot control stations, and assembly systems to achieve real-time data interaction with a large number of distributed I/O, robot controllers, and vision systems. In the packaging industry, it is applied in high-speed packaging machines to synchronize the actions of multiple servo drives. For machine manufacturers, using the CIFX50-C0 enables the development of standard equipment that can be seamlessly integrated into any mainstream automation network (such as PROFINET or EtherNet/IP), solving the core problem of equipment interconnection and interoperability, and enhancing the market competitiveness and flexibility of products.
Installation and Maintenance
Pre-Installation Preparation
Before installing the GE CIFX50-C0, be sure to turn off the power of the industrial computer and disconnect all power cables. Prepare an anti-static wristband to prevent electrostatic discharge from damaging electronic components. Confirm that there is an available PCI Express x1 or longer slot (compatible with x1 cards) on the motherboard. According to the target network plan, install the software on the PC in advance and obtain the required protocol firmware files.
Maintenance Recommendations
The maintenance of this card is mainly at the software level. Regularly check the network connection status and indicator lights. When it is necessary to replace the protocol or a communication failure occurs, first use the software to check whether the firmware version is correct and whether the configuration parameters match the master station. Ensure that the latest version of the driver is installed. In environments with high dust levels, it is recommended to regularly clean the dust on the card’s heat sink and interfaces with compressed air. The hardware itself usually requires no maintenance; if physical damage occurs, direct replacement is the most efficient solution in the entire process.
————————————————————————————————————-
If you would like to learn more about our products and services, please feel free to contact us at any time!
- Sales Manager : Jinny
- Email : sales5@xrjdcs.com
- Whatsapp/Mobile:+86 15359273791
Global renowned brand cooperation
ABB 丨 GE 丨Allen Bradley 丨 Honeywell 丨 Emerson 丨 Bently Nevada 丨 Westinghouse
Triconex 丨 Foxboro 丨 ICS Triplex 丨 Hima 丨 Schneider 丨 Yokogawa 丨 Woodward
—————————————————————————————
Core Product Range
Control & Signal Modules
- Central Control Units: PLC, DCS, CPU modules
- Interface & Communication Modules: Input/Output (AI/AO/DI/DO) modules, fiber optic interface boards, communication modules
- Functional Boards & Cards: I/O boards, counting boards, data acquisition cards, gas turbine cards, FIM cards, embedded cards
Drive & Peripheral Equipment
- Servo drives, servo motors
- Industrial displays, industrial keyboards
- Controllers, encoders, regulators, sensors
Power & Connection Components
- Power modules, thyristor modules, terminal modules
- Wires, cables, power modules, control modules
Our Competitive Advantages
- Industry Expertise & Inventory Strength: With long-term experience in the industrial control sector, we maintain a large stock of in-demand products to ensure fast delivery.
- Leading Market Position: We stand out with competitive pricing and strict quality control, guaranteeing reliable performance of all products.
- Comprehensive Product Coverage: Beyond standard models, we also supply rare and discontinued automation parts, meeting diverse customer needs.
- Assured After-Sales Service: Any product with quality issues can be replaced free of charge within 15 days of purchase, providing peace of mind for your operations.
Applicable Industries
Our automation spare parts are widely used in key sectors including:
Iron & steel, hydropower, nuclear power, power generation, glass manufacturing, tire factories, rubber production, thermal power generation, papermaking, shipping, navigation, and more.
Iron & steel, hydropower, nuclear power, power generation, glass manufacturing, tire factories, rubber production, thermal power generation, papermaking, shipping, navigation, and more.
Write your message here and send it to us
