Welcome to our websites!
HIMA F4303A Input Module
HIMA F4303A
The HIMA F4303A is a high-performance four-channel digital (contact) input module launched by HIMA, specifically designed for the HIMA H41q/H51q safety control system. In the Safety Instrumented System (SIS), this module acts as a “sentinel”. Its core function is to reliably collect discrete signals from hazardous areas on-site, such as the status of emergency stop buttons, pressure switches, level switches, or valve position transmitters. After isolating and converting these status signals, it transmits them to the system’s central processing unit for logical judgment.
Product Parameters
- Product Model: F4303A
- Manufacturer: HIMA
- Product Type: Digital Input Module (Contact Signal)
- Number of Channels: 4 channels (2 channels per group share a common ground)
- Input Type: Dry Contact (Passive Contact)
- Rated Input Voltage: 24 VDC (Powered by internal or external safety barrier)
- Power Consumption: Typical 60 mA @ 5V (From the base)
- Response Time: < 10 ms
- Diagnostic Function: Channel – level short circuit and open circuit detection
- Operating Temperature: -40°C to +70°C
- Protection Level: Compliant with IEC 61131 – 2 standard
- Safety Certification: SIL 3 (In accordance with IEC 61508/61511)
- Installation Method: Installed via F – COMM – A or F – COMM – B communication base
Structure and Composition
The HIMA F4303A module itself is an electronic function card and does not connect directly to on-site wiring. Instead, it needs to be inserted into a dedicated communication base (such as F – COMM – A) for use. The module adopts a standard European – style card design, equipped with a sturdy front panel and a red operating handle.
Its internal structure integrates multiple isolated signal processing circuits. Each group of channels uses photoelectric isolation or magnetic isolation technology to ensure effective electrical isolation between the on-site side and the system side, preventing high – voltage from entering and damaging the system. Each input channel is equipped with independent signal conditioning, filtering, and diagnostic circuits, which can continuously monitor the current status of the input circuit.
The module is connected to the base through gold – finger connectors at the rear. It obtains working power from the base and exchanges data with the backplane bus. The base is responsible for providing on-site wiring terminals, external power supply interfaces, and necessary fuse protection. This design that separates the module from the base makes maintenance and replacement very convenient.
Main Features and Advantages
Extremely High Safety and Reliability
The core value of the HIMA F4303A lies in its compliance with the SIL 3 safety level requirements. It uses high – reliability components and redundant circuit design, and has comprehensive internal diagnostic functions. It can real – time detect short – circuit (to high voltage) and open – circuit (line disconnection) faults of each input channel, and immediately report the fault information to the main controller. This ensures that the system is always in a known safe state, avoiding misoperation or failure to operate caused by the failure of input signals.
Flexible Power Supply and Configuration
This module supports a flexible grouped power supply method. The two groups of channels can be independently powered by an external safety power supply. This design is very suitable for application scenarios in different hazardous areas that require physical isolation. It can directly connect to dry contact signals without the need for additional signal converters, simplifying system design and reducing wiring costs.
Convenient Maintenance and High Availability
The module supports online hot – swapping. When a F4303A module needs to be replaced, maintenance personnel can directly pull out the faulty module and insert a new one without powering off or shutting down the system. The system will automatically identify and restore the configuration, minimizing unplanned downtime and ensuring high availability of the production process.
Installation and Maintenance
Preparation Before Installation
Before installing or replacing the HIMA F4303A module, you must obtain operation permission and confirm that the system is in a state allowing maintenance. Prepare a suitable base and ensure that the on – site wiring is correctly connected and fastened to the base terminals. Operators should wear anti – static wristbands to prevent electrostatic discharge from damaging the precision electronic components on the module. Be sure to confirm that the model label of the module is completely consistent with the required spare parts.
Maintenance Recommendations
During regular inspections, pay attention to observing whether the status indicator lights on the module panel display normally. It is recommended to use HIMA’s dedicated diagnostic software to regularly check the health status of the module and channel diagnostic information for preventive maintenance. When the module needs to be replaced, be sure to unlock the red front handle of the module first, then pull it out smoothly from the base. When inserting a new module, align it with the base guide rail and push it in firmly until a click is heard to ensure that the connector is fully in contact. After replacing the module, confirm that its status has returned to normal in the system.
————————————————————————————————————-
If you would like to learn more about our products and services, please feel free to contact us at any time!
- Sales Manager : Jinny
- Email : sales5@xrjdcs.com
- Whatsapp/Mobile:+86 15359273791
Global renowned brand cooperation
ABB 丨 GE 丨Allen Bradley 丨 Honeywell 丨 Emerson 丨 Bently Nevada 丨 Westinghouse
Triconex 丨 Foxboro 丨 ICS Triplex 丨 Hima 丨 Schneider 丨 Yokogawa 丨 Woodward
—————————————————————————————
Our Advantages & Services
- Reduce Maintenance Costs: We help you lower equipment maintenance costs by providing high-quality spare parts and professional services.
- Shorten Downtime: With fast spare parts supply, we minimize equipment downtime and enhance production efficiency.
- Extend Equipment Lifespan: Using original or compatible high-quality spare parts helps prolong the service life of your equipment.
- One-Stop Global Supply of PLC Spare Parts: No matter which brand or model of PLC spare parts you need, we can provide you with fast and accurate solutions.
- Professional Team & Technical Support: We have a team of experienced engineers to offer you professional technical support and maintenance services.
- Original Factory Quality at Preferential Prices: The PLC spare parts we provide are either original or compatible products, ensuring quality while offering more competitive prices.
- Rapid Response & Global Shipping: Equipped with a sound logistics system, we can quickly respond to your needs and deliver spare parts to you in a timely manner.
Company’s Advantageous Services
- We have long been engaged in the industrial control industry and maintain a large inventory.
- Leading in the industry, with price advantages and quality assurance.
- A wide range of models and products, including various rare and discontinued products.
- Free replacement is available within 15 days if there are quality issues.
Our product range covers various modules, cards, drivers, controllers, servo motors, embedded cards, wires & cables, power modules, and control modules. These products are suitable for industries such as iron and steel, hydropower, nuclear power, power generation, glass manufacturing, tire factories, rubber production, thermal power generation, papermaking, shipping, and navigation.
Write your message here and send it to us
