Tellabs 9003A

The Tellabs 9003A is a high-density optical access/transmission module developed by Tellabs, tailored for carrier and large enterprise networks. It belongs to the company’s Optical Network Terminal (ONT)/Optical Access product line. Designed specifically to deliver reliable multi-service (voice, video, data) access, this model achieves high port density and flexible interface configuration within a single chassis.

Key Technical Specifications

• Operating Wavelength: 1310 nm (upstream) / 1550 nm (downstream)
• Transmission Rate: Supports 1 Gbps and 10 Gbps Ethernet ports; upstream aggregation up to 40 Gbps/100 Gbps with select configurations
• Port Density: 24 × 10/100/1000 Mbps Ethernet ports + 4 × SFP+ 10 Gbps optical ports (optional)
• Power Supply: Local power supply or Power over Ethernet (PoE), with support for external UPS backup
• Dimensions: 1U rack-mountable, 19-inch width, approximately 300 mm depth, weighing around 3 kg
• Operating Temperature: 0 °C - 45 °C (extendable to -10 °C - 55 °C with optional industrial-grade version)
• Environmental Rating: IP20 (for indoor cabinets); optional dust-proof and moisture-proof enclosure (IP55)

Product Features

1. High Reliability
    

   Equipped with redundant power supplies and hot-swappable optical module design, supporting online upgrades and seamless failover.

2. Multi-Service Convergence
    

   Delivers integrated services including VoIP, IP video, and enterprise data via a single access point, simplifying network architecture.

3. Flexible Interface Configuration
    

   Customizable with SFP, SFP+, and QSFP+ optical ports based on user requirements, compatible with multi-mode and single-mode fiber types.

4. Remote Management
    

   Supports SNMP, TR-069, Web GUI, and CLI for centralized monitoring and batch configuration.

5. Energy-Saving Design
    

   Power consumption ranges from 30 W to 80 W (depending on port utilization), with a low-power standby mode.

Structure and Components

• Chassis: Metal rack-mount enclosure with built-in heat dissipation channels.
• Power Supply Module: Dual redundant power supplies, supporting AC 100–240 V or DC 48 V input options.
• Main Control Board: Powered by a high-performance network processor, responsible for traffic distribution, QoS, VLAN, and ACL functions.
• Optical Module Tray: Features hot-swappable slots for SFP/SFP+/QSFP+ modules.
• Ethernet Port Board: Provides 10/100/1000 Mbps RJ45 interfaces with PoE+ support (up to 30 W per port).
• Management Interfaces: Dedicated Console (RS‑232) and Management Ethernet ports for local and remote configuration.

Typical Application Scenarios

• Carrier Broadband Access: Serves as a Fiber-to-the-Home (FTTH) or Fiber-to-the-Building (FTTB) node.
• Enterprise Campus Networks: Acts as a unified multi-service access platform for large-scale campuses.
• Data Center Edge: Enables high-speed fiber backhaul at edge computing nodes.
• Government/Education Networks: Meets stringent requirements for security, reliability, and centralized management.

Installation and Maintenance Guidelines

1. Rack Installation
    

   Mount on a standard 19-inch rack, ensuring sufficient ventilation space at the rear of the chassis.

2. Power Connection
    

   Recommended to deploy dual redundant power supplies with UPS backup to prevent power outages.

3. Fiber Optic Connection
    

   Use single-mode/multi-mode fibers compliant with IEC 61754‑1 standards. Ensure clean fiber end faces and verify link loss with an optical power meter.

4. Initial Configuration
    

   After first power-on, complete basic IP, VLAN, and QoS settings via Console or Web GUI; subsequent policy deployment can be done in batches via SNMP/CLI.

5. Firmware Upgrade
    

   Perform upgrades during off-peak hours using officially signed firmware packages. Back up current configurations before upgrading.

6. Monitoring and Alarming
    

   Enable SNMPv3 or Syslog to report key metrics (CPU usage, memory utilization, port error rate) to the Network Management System (NMS). Configure threshold-based alarms for rapid fault localization.

7. Regular Inspection
    

   Check power supply status, fan operation, and optical module power levels every 6 months to ensure the device operates within the rated temperature range.

If you would like to learn more about our products and services, please feel free to contact us at any time!

• Sales Manager : Jinny
• Email : sales5@xrjdcs.com
• Whatsapp/Mobile:+86 15359273791

Global renowned brand cooperation

ABB 丨 GE 丨Allen Bradley  丨  Honeywell 丨   Emerson  丨  Bently Nevada   丨 Westinghouse  

Triconex  丨   Foxboro 丨   ICS Triplex  丨  Hima  丨  Schneider 丨  Yokogawa  丨 Woodward

—————————————————————————————