II. Key Specifications

• Display: 10-inch flat-panel LCD (STN/TFT optional) with a resolution of 800×600 pixels
• Power Supply: 115V/230V AC, wide voltage range 100–240V, power consumption approx. 30W
• Processor: PC/AT compatible CPU (specific model varies by configuration), supporting Windows XP/7/10 Embedded
• Storage: Optional 2GB/4GB DDR RAM; 40GB/80GB SATA hard drive (SSD optional)
• I/O Interfaces: 2×USB 2.0 ports, 2×RS-232 serial ports, 10/100Mbps Ethernet, VGA output (for external displays)
• Environmental Ratings: Operating temperature -20°C to +60°C, NEMA 4/4X/12 protection, shock and vibration resistant
• Dimensions/Weight: 210mm (W) × 150mm (D) × 70mm (H), approx. 2.5kg (including display)

III. Product Features

• All-in-One Design: Integrates PC motherboard and display panel in a single chassis, saving space and simplifying wiring
• Industrial-Grade Reliability: NEMA 4/4X/12 rating provides dust, water, and shock protection for workshops and on-site harsh environments
• Flexible Expansion: Multiple I/O interfaces support external module additions (e.g., digital I/O, communication cards) based on on-site requirements
• Easy Maintenance: Front and rear panels enable quick disassembly; internal components (CPU, storage, cooling system) are field-replaceable
• Multi-Language/Multi-System Support: Compatible with multiple operating systems and localized interfaces (Chinese, English, etc.)

IV. Structure and Composition

• Front Panel: 10-inch touch/non-touch LCD, operation buttons, indicator lights
• Rear Panel: Power inlet, USB ports, serial ports, Ethernet port, VGA output, expansion slots (PCI/PCIe), etc.
• Internal Modules: CPU motherboard, memory slots, hard drive caddy, cooling fan, power supply module
• Chassis: Metal construction compliant with NEMA 4/4X/12 standards, equipped with shock-absorbing pads

V. Typical Application Areas

• Monitoring and control stations for automated production lines
• On-site equipment fault diagnosis and maintenance terminals
• HMI for logistics and warehousing systems
• Process monitoring in energy, chemical, metallurgical, and other industries
• Transportation, railway signaling, and other scenarios requiring rugged industrial PCs

VI. Installation and Maintenance Guidelines

Installation

1. Select an installation location meeting NEMA 4/4X/12 protection standards and ensure adequate ventilation for heat dissipation.
2. Secure the front and rear panels using included screws and brackets; connect power and signal cables before initial power-on.
3. Reserve or install required expansion cards (e.g., digital I/O, communication modules) based on on-site needs.

Commissioning

1. After power-on, enter BIOS to verify hardware detection (memory, hard drive, network, etc.).
2. Install the operating system and drivers, then perform basic function tests (display, USB, serial ports, network).

Routine Maintenance

1. Regularly inspect chassis gaskets to prevent water and dust ingress.
2. Clean dust from cooling fans and heat sinks to maintain unobstructed heat dissipation.
3. Backup system images for quick recovery.

Troubleshooting

• Display Abnormalities: First check power supply and backlight power; if unresolved, inspect LCD interface cables.
• Network/Serial Port Failures: Replace corresponding interface cards or check cable connections.
• Key Component Replacement: Modular design of critical components (CPU motherboard, hard drive) enables easy on-site replacement.