Welcome to our websites!
XYCOM XVME-404 Drive Board
XYCOM XVME-404
1. Overview
The XYCOM XVME‑404 is a multi-driver board designed for industrial automation applications, compliant with the VMEbus standard. It is ideal for control systems that require multi-channel signal output. Featuring a modular design and hot-swappable capability, this module enables rapid on-site deployment and replacement, minimizing system downtime.
2. Key Specifications
- Model/Part Number: XVME‑404
- Power Supply: 18 V - 30 V DC (24 V typical)
- Protection Class: IP65, suitable for harsh industrial environments
- Operating Temperature: -20 °C - +60 °C
- Dimensions: Approximately 150 mm × 100 mm × 50 mm (single-width, single-height)
- Interfaces: VMEbus (compliant with IEEE 1014), with optional extended interfaces such as RS‑232/RS‑485 and Ethernet
3. Product Features
- Low-Power Design: Equipped with low-power consumption chips and a passive heat dissipation structure, ensuring minimal energy consumption during operation and stable heat management.
- Modular Hot-Swapping: Supports hot-swappable functionality, allowing maintenance without system shutdown and significantly reducing repair time.
- Multi-Protocol Compatibility: Built-in with multiple communication methods including RS‑232, RS‑485, and Ethernet, facilitating seamless system integration with diverse devices and platforms.
- High Protection Level: With an IP65 rating, it can operate reliably in humid and dusty industrial settings, resisting environmental contaminants.
- Wide Temperature Adaptability: The operating temperature range of -20 °C to +60 °C meets the rigorous demands of industrial field applications, ensuring performance stability under extreme temperature fluctuations.
4. Structure and Components
- Power Module: Responsible for voltage conversion and stabilization, providing a stable power source for all internal components.
- Communication Interface Board: Delivers interfaces for RS‑232, RS‑485, and Ethernet, enabling multi-channel data transmission and system connectivity.
- Processor/Control Unit: Implements signal driving and logic control, processing input commands and generating precise output signals for connected devices.
- Heat Dissipation Device: A passive heat sink that ensures long-term thermal stability, preventing overheating and extending the module’s service life.
- Enclosure: A metal or high-strength plastic casing that meets the IP65 protection standard, shielding internal components from dust, water, and physical impacts.
5. Application Fields
- Industrial automation control systems
- Process control (chemical, petroleum, metallurgical industries, etc.)
- Machine vision and robot control
- Building automation and energy management
- Any VMEbus environment requiring multi-channel digital/analog signal driving
6. Installation and Maintenance
Pre-Installation Inspection
Verify the power supply voltage, chassis fixing screws, and interface orientation to ensure compatibility and proper alignment before installation.
Plug-in Method
Adopts a card slot-based plug-in design with hot-swappable support. Align the module with the slot guide rails and gently push until the latch locks securely in place.
Wiring
Connect the power supply, signal lines, and communication interfaces in accordance with the wiring diagram, ensuring firm and reliable contact to avoid signal interruption or power failure.
Debugging
After powering on, check the status indicators to confirm normal power supply. Use upper computer software to conduct functional tests and verify that all modules operate as intended.
Regular Maintenance
- Inspect and clean dust accumulation on the heat sink every 6 months to maintain effective heat dissipation.
- Check the tightness of connectors and re-tighten them if necessary to prevent loose connections.
Troubleshooting
- In case of abnormal indicator lights or communication interruption, first inspect the power supply and wiring connections for faults.
- If the issue persists, refer to the maintenance manual for module replacement or contact the manufacturer for professional repair services.
————————————————————————————————————-
If you would like to learn more about our products and services, please feel free to contact us at any time!
- Sales Manager : Jinny
- Email : sales5@xrjdcs.com
- Whatsapp/Mobile:+86 15359273791
Global renowned brand cooperation
ABB 丨 GE 丨Allen Bradley 丨 Honeywell 丨 Emerson 丨 Bently Nevada 丨 Westinghouse
Triconex 丨 Foxboro 丨 ICS Triplex 丨 Hima 丨 Schneider 丨 Yokogawa 丨 Woodward
—————————————————————————————
Xiamen Xingruijia Import and Export Co., Ltd.
Xiamen Xingruijia Import and Export Co., Ltd. is a customer-centric enterprise that provides comprehensive industrial control products and services. We not only offer a full range of industrial control equipment, but also provide professional technical support, after-sales service, and system integration services. Our mission is to solve all worries for customers, enabling them to focus on their core businesses.
Frequently Asked Questions (FAQs)
Q1: What is the earliest delivery time you can offer?
A: We will arrange shipment upon receipt of your payment.
Q2: Do you have overseas branches?
A: We do not have overseas branches, but our products are sold to customers all over the world.
Q3: Are you a manufacturer or a trader?
A: We are a trading company.
Q5: Can you provide data sheets/literatures/technical documents?
A: Data sheets will be delivered together with the goods.
Write your message here and send it to us
