XYCOM 3512-A1A1141035

I. Overview

II. Key Technical Specifications

III. Product Features

• Modular Plug-and-Play Design: Supports hot swapping for quick on-site replacement or upgrades, reducing downtime.
• Multi-Protocol Compatibility: Built-in dual channels (RS-485 and Ethernet) compatible with common industrial protocols such as Modbus, Profibus, and Ethernet/IP.
• High Reliability: Adopts low-power chips and passive heat dissipation structure, resulting in low heat generation during operation and extended service life.
• User-Friendly Human-Machine Interaction: 15-inch touchscreen with an intuitive graphical interface for easy operation, suitable for on-site maintenance personnel.
• Easy Integration: Equipped with standard DIN rail mounting holes for direct installation on the side wall of control cabinets or inside enclosures.

IV. Structure and Composition

• Front Panel: Touch LCD, status indicators, and emergency stop button.
• Internal Motherboard: CPU (based on ARM Cortex-A series), power management module, and communication chips.
• Interface Cables: RS-485, Ethernet, and power terminal blocks.
• Heat Sink: Full aluminum material with passive heat dissipation, compatible with chassis ventilation.
• Mounting Bracket: Compliant with DIN rail specifications, featuring screw fixing holes.

V. Typical Application Areas

• Process Control Systems: On-site monitoring of continuous production lines in chemical, petroleum, metallurgical, and other industries.
• Machine Vision and Inspection Equipment: Serves as a human-machine interaction terminal to display inspection results and parameters.
• Energy Management: Status display and manual control of power distribution cabinets and substations.
• Automated Assembly Lines: Local operation interface between PLCs and upper-level systems.
• Building Automation: On-site control panels for air conditioning, lighting, and security systems.

VI. Installation and Maintenance Guidelines

Installation

1. Fix using DIN rails to ensure the bracket is stable.
2. Confirm the power supply phase (115 V or 230 V) before wiring, and use terminal blocks complying with IEC standards.
3. Use shielded twisted-pair cables for communication lines (RS-485, Ethernet) to avoid electromagnetic interference.

Commissioning

1. After power-on, the self-test runs automatically, and the screen displays “SELF-TEST PASS”.
2. Set the IP address, subnet mask, and gateway through the built-in network configuration wizard.
3. Use XYCOM’s HMI software (e.g., Xycom HMI Designer) for screen editing and function mapping.

Daily Maintenance

1. Regularly check power and communication terminals for looseness or oxidation.
2. Clean the touchscreen surface without using strong acid or alkaline cleaners.
3. In case of abnormalities, use remote diagnostic tools provided by the supplier to read fault logs. Replace the motherboard or power module if necessary (supports hot swapping).

Troubleshooting

• No Display: Check the power supply and internal fuse. If the issue persists, the power module may be faulty.
• Communication Interruption: Verify RS-485/Ethernet cable connections and IP configuration. Use ping or Modbus testing tools to locate the problem.
• Unresponsive Touchscreen: Calibrate the touchscreen or replace the touch layer.

If you would like to learn more about our products and services, please feel free to contact us at any time!

• Sales Manager : Jinny
• Email : sales5@xrjdcs.com
• Whatsapp/Mobile:+86 15359273791

Global renowned brand cooperation

ABB 丨 GE 丨Allen Bradley  丨  Honeywell 丨   Emerson  丨  Bently Nevada   丨 Westinghouse  

Triconex  丨   Foxboro 丨   ICS Triplex  丨  Hima  丨  Schneider 丨  Yokogawa  丨 Woodward

—————————————————————————————