XYCOM 9462-0132120016002

XYCOM 9462‑0132120016002 is a control module of the XYCOM 9462 series, belonging to the high-performance industrial automation control units under the XYCOM 9400 series. It adopts a modular plug-and-play structure with hot-swappable support, making it suitable for field control systems that require high reliability and flexible expansion.

Key Specifications

• I/O Channels: 32 digital inputs + 32 digital outputs (expandable to 64 channels)
• Voltage Range: 0～24 VDC for input, 0～30 VDC for output
• Operating Temperature: -20 °C to 60 °C
• Protection Class: IP65, suitable for harsh industrial environments
• Communication Interfaces: VME bus, Modbus RTU, EtherCAT, RS‑485, Ethernet (10/100 Mbps)
• Power Supply: 24 VDC ± 10%, built-in overvoltage/undervoltage protection
• Processor: Optional Intel Xeon series (customizable)
• Storage: DDR2 SDRAM, Flash, expandable to 64 GB HBM (High Bandwidth Memory)
• Dimensions: Approximately 150 mm × 100 mm × 50 mm (width × depth × height)
• Weight: Approximately 7 kg

Product Features

• Modular Design: Plug-and-play I/O expansion cards and communication cards enable quick on-site replacement and upgrades.
• Low Power Consumption & Passive Cooling: Adopts low-power chips and passive cooling structure to reduce energy consumption and extend service life.
• Multi-Protocol Compatibility: Supports industrial fieldbuses such as VME, Modbus, EtherCAT, and Ethernet, facilitating integration with equipment from different manufacturers.
• High Reliability: IP65 protection, wide operating temperature range, and power supply monitoring ensure stable operation in harsh environments.
• Strong Expandability: Both I/O cards and communication cards support hot swapping for rapid on-site capacity expansion.

Structure and Composition

• Main Control Board: Integrates PowerPC/Intel Xeon processor, DDR2 SDRAM, Flash storage, and VME interface.
• I/O Expansion Card: Provides multiple signal channels including digital inputs, digital outputs, and counters.
• Communication Card: Implements communication for various fieldbuses such as Ethernet, RS‑485, Modbus, and EtherCAT.
• Display/Operation Panel (optional touchscreen HMI): Used for on-site operation, status display, and parameter setting.
• Power Supply Module: Delivers 24 VDC regulated power supply with overvoltage, undervoltage, and power monitoring functions.

Typical Application Fields

• Power system monitoring and protection
• Industrial automation control stations (e.g., PLC, DCS front-end)
• Rail transit signal and power supply systems
• Petrochemical process control
• Motion control for robots and intelligent manufacturing equipment
• Any field control scenarios requiring high reliability, modular I/O, and multi-protocol communication

Installation and Maintenance Guidelines

• Pre-installation Check: Confirm the power supply voltage is within the range of 24 VDC ± 10%, and verify that the chassis protection class meets on-site environmental requirements.
• Mechanical Installation: Fix with standard 19-inch rack or DIN rail, ensuring ventilation openings are not blocked.
• Electrical Wiring: Use clearly labeled terminals, and shielded cables for digital inputs/outputs to reduce interference.
• Module Plugging/Unplugging: Before operation, turn off the power of the corresponding slot when the system is powered off or using the hot-swap function to avoid transient voltage impact.
• Software Configuration: Log in to the control module via Ethernet or VME interface, and use the configuration tool provided by XYCOM for I/O mapping and communication protocol parameter setting.
• Regular Maintenance: Check the output voltage and current of the power supply module every 6 months, clean dust on heat sinks, and confirm the protection seal is intact.
• Fault Diagnosis: The module is equipped with LED indicators—red indicates power or communication abnormalities, and yellow indicates I/O faults. Problems can be quickly located via diagnostic software.

If you would like to learn more about our products and services, please feel free to contact us at any time!

• Sales Manager : Jinny
• Email : sales5@xrjdcs.com
• Whatsapp/Mobile:+86 15359273791

Global renowned brand cooperation

ABB 丨 GE 丨Allen Bradley  丨  Honeywell 丨   Emerson  丨  Bently Nevada   丨 Westinghouse  

Triconex  丨   Foxboro 丨   ICS Triplex  丨  Hima  丨  Schneider 丨  Yokogawa  丨 Woodward

—————————————————————————————